: +86-632-3536766   :info@dongtaochem.com
current position:Gather carboxylic acid anti-scaling dispersant
DT-5000AA-HPA–AMPS Terpolymer (C3O2H4)n(C7O4H13NS)m(C6O3H10)x 1,Properties: It is the latest sulfosalt copolymers , contains carboxylic acid groups , hydroxyl , sulfo group , and amido four efficiency groups . With amido group , it can improve the medicament’s anti-gelation ability. High tolerance to calcium , excellent scale inhibition ability for calcium carbonate and organic phosphorus acid calcium. Excellent high temperature tolerance and oxidative stability. Efficient dispersity for iron , indium zinc oxide , bedload etc. inorganic matter. Good threshold effect , and coordinate effect. 2,Specification items index Appearance Colorless or light yellow transparent liquid Solid content,% ≥ 45.0 Free monomer (as AA),% ≤ 0.5 PH(1% solution) ≤ 3.0 Density(20℃)g/cm3≥ 1.20 Viscosity(mPa.s/cps at 25℃) 400-500 3 ,Usage: It can be used as scale inhibitor and dispersant in industrial circulating water system, oilfield refill water system and boiler water. 4 , Storage and Packing Storing with plastic barrels of 25L or 200L , Storage for 10 months in room shady and dry place. 5 , Safety and Protection Avoid contact with eye and skin when operating .Once contacted, flush with water.
DT-3100 Carboxylate-Sulfonate-Nonion Tri-polymer 1,Properties and usage DT-3100, the most excellent scale dispersant in all cooling water system , with good inhibiting effect for both dry-type and hydrated iron oxide ,is also an excellent anticrustator . It also can be used as stabilizer for corrosion inhibitor of phosphate and inhibitor of cooling water system and boiler water .Especially suitable for the system that contains iron and zinc under pressure condition. Properties are equal to ACUMER3100. 2,Specification items index Appearance Amble transparent liquid Solid content % 43.0-44.0 Density(20℃)g/cm3≥ 1.15 PH(1% solution) 2.1-2.8 3 , Usage: Concentration is during 10~30 , if used alone .While in other field as dispersant , it may be used according to the experimental amount. 4 , Storage and Packing Storing with plastic barrels of 25L or 200L , Storage for 10 months in room shady and dry place. 5 , Safety and Protection DT-3100 is of weak acidity . Avoid contact with eye and skin when operating .Once contacted, flush with water.
DT-2000 AA-AMPS binary copolymer (C3O2H4)n(C7O4H13NS)m 1 , Properties: It is the copolymer of Acrylic and AMPS , then counteract with sodium hydroxide. Its structure contains carboxylic acid groups, hydroxyl ,sulfo group,and amido four efficiency groups. Excellent high temperature tolerance and oxidative stability. Efficient dispersity for iron , indium zinc oxide , bedload etc. inorganic matter. Good threshold effect , and coordinate effect . Equal to ACUMER 2000 2,Specification items index Appearance Colorless or light yellow transparent liquid Solid content% ≥ 43.0 Free monomer (as AA),% ≤ 0.5 PH(1% solution) 3.5~5.5 Density(20℃)g/cm3≥ 1.20 Viscosity(mPa.s/cps at 25℃) 300-500 3 , Usage: It can be used as scale inhibitor and dispersant in industrial circulating water system , oilfield refill water system . 4 , Safety and Protection Neutral , avoid contact with eye and skin , once contacted , flush with water. 5,Storage and Packing Storing with plastic barrels of 25L or 200L , Storage for 10 months.
DT-1100Sodium Polyacrylate Structural Formula 1,Properties and usage DT-1100 is a kind of salt , produced during the neutralization reaction of the low molecular weight PAA homopolymer .It can inhibit calciumcarbonate, calciumsulfate and other silt from depositing by dispersing them .It is normal dispersant widely used in the field of papermaking , printing and dyeing , Ceramics , and so on . Properties is similar to ACUMER 1100. 2,Specification items index Appearance Amber transparent liquid Solid content % 47.0-49.0 Density (20℃)g/cm3≥ 1.22 pH(1% solution) 3.0 - 4.5 Viscosity(mPa.s/cps at 25℃) 700-900 3,Using Methord DT-1100 is used as inhibitor of circulating cool water system and boilers . Concentration is during 10~30 , if used alone .While in other field , it may be used according to the experimental amount. 4,Packing and Storage Storing in 25L or 200L plastic barrel. Storage for ten month in room shady and dry place. 5,Safety Methord DT-1100is with weak acidity, avoid contact with eye and skin, once contacted, flush with water.
DT-1000Sodium Polyacrylae Structural Formula 1,Properties and usage DT-1000 is a kind of salt , produced during the neutralization reaction of the low molecular weight PAA homopolymer .It can inhibit calciumcarbonate, calciumsulfate and other silt from depositing by dispersing them .It is normal dispersant widely used in the field of papermaking , printing and dyeing , Ceramics , and so on . Properties is similar to ACUMER 1000. 2,Specification items index Appearance Amber transparent liquid Solid content % 47.0-49.0 Density (20℃)g/cm3≥ 1.22 pH(1% solution) 3.0 - 4.5 Viscosity(mPa.s/cps at 25℃) 200-300 3,Using Methord DT-1000 is used as inhibitor of circulating cool water system and boilers . Concentration is during 10~30 , if used alone .While in other field , it may be used according to the experimental amount. 4,Packing and Storage Storing in 25L or 200L plastic barrel. Storage for ten month in room shady and dry place. 5,Safety Methord Weak acidity, avoid contact with eye and skin, once contacted, flush with water.
DT-103Acrylic-Maleic anhydride-AMPS copolymers 1,Properties: It is the latest sulfosalt copolymers , contains carboxylic acid groups , hydroxyl , sulfo group , and amido four efficiency groups . With amido group , it can improve the medicament’s anti-gelation ability. High tolerance to calcium , excellent scale inhibition ability for calcium carbonate and organic phosphorus acid calcium. Excellent high temperature tolerance and oxidative stability. Efficient dispersity for iron , indium zinc oxide , bedload etc. inorganic matter. Good threshold effect , and coordinate effect. 2,Specification: items index Appearance Colorless or light yellow transparent liquid Solid content% ≥ 30.0 Free monomer(as Acrylic)% ≤ 0.5 PH(1% solution) ≤ 3.0 Density(20℃)g/cm3≥ 1.10 Limit viscosity number(30℃)dl/g 0.055~0.095 3,Usage It can be used as scale inhibitor and dispersant in industrial circulating water system , oilfield refill water system and boiler water. 4,Package and Storage 25Lor 200L in plastic barrel . Storage for one year in room shady and dry place. 5,Safety Protection Weak acidity , avoid contact with eye and skin , once contacted , flush with water.
Sodium of Polyaspartic Acid(PASP) 【CAS】181828-06-8,35608-40-6 Molecular Formula:C4H6NO3(C4H5NO3)C4H6NO4 Molecular weight:1000-5000 Structure: 1,Properties: PASP is a water soluble polymer. It is a green water treatment agent, with properties of non-phosphor, non-nitrogen, non-pollution and fully biodegradation. PASP has good scale inhibition on calcium carbonate, calcium sulfate, barium sulfate, calcium phosphate, etc.. Its scale inhibition rate for calcium carbonate is 100%. Moreover, PASP has dispersion and corrosion inhibition properties to metal equipment. PASP is an alternative of phosphor-containing Water Treatment Chemicals, avoiding water system eutrophication and second pollution. 2,Specification: items index Appearance Ambertransparent liquid Solid content % ≥ 40.0 Density (20℃)g/cm3≥ 1.20 pH(1% water solution) 9.0-11.0 3,Application range: 1, PASP can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant. The effects will be even better than ordinary organophosphines when used in situation of high hardness, high alkaline, high pH value and high concentration index. When built with PBTCA, the synergism is obvious. 2, Due to its green and non-pollution to environment, PASP can be used as accessory ingredients in daily and fine chemicals. 3, PASP can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved. 4,Package and Storage: Normally In 25kg or 250kg net Plastic Drum, or packed as customers’ request. Storage for ten months in room shady and dry place. 5,Safety Protection: Alkaline, Avoid contact with eye and skin, once contacted, flush with water.
Sodium of Polyepoxysuecinic Acid(PESA) Molecular Formula:HO(C4H2O5M2)nH Molecular weight: 400-1500 Structure: 1,Properties: PESA is a multivariate scale and corrosion inhibitor with non-phosphor and non-nitrogen, it has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious. PESA has good biodegradation properties, it can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. PESA can be operated under high concentration index. PESA has good synergism with chlorine and other Water Treatment Chemicals. 2,Specification: items index Appearance Colorless oramble transparent liquid Solid content % > 40.0 Density (20℃)g/cm3≥ 1.28 PH(1% water solution) 9.0-12.0 3,Application range: PESA can be used in system of oilfield refill water, crude oil dehydration and boiler;PESA can be used in circulating cool water system of steel, petrochemical, power plant, medicine. PESA can be used in boiler water, circulating cool water, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index. PESA can be used in detergent fields. 4,Package and Storage: Normally In25 or 250kg net Plastic Drum, or packed as customers’ request. Storage for ten months in room shady and dry place. 5,Safety Protection: Alkaline, Avoid contact with eye and skin, once contacted, flush with water.
DT-106Copolymer of Maleic and Acylic Acid Sodium 1,Properties: MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid,then counteract with sodium hydroxide. Excellent high temperature tolerance and oxidative stability Good threshold effect, and coordinate effect. 2,Specification: items index Appearance Dark brown transparent liquid Solid content % ≥ 40.0 Free monomer (as acylic)% ≤ 5.0 PH(1% solution) 6.5-8.5 Density (20℃)g/cm3≥ 1.20 3,Usage: It can be used in circulating cool water system, rejection of oil flied effluentand lower pressure boiler and distillation system. When used together with other organic phosphorus prouducts, the dosage of 5—20mg/L is preferred. 4,Safety Protection: Weak acidity, avoid contact with eye and skin, once contacted, flush with water. 5,Package and Storage: 25L or 200L in plastic barrel. Storage for ten month in room shady and dry place.
DT-102Hydrolyzed Polymaleic AnhydrideHydrolyzed Polymaleic Anhydride 1,Properties DT-102is a sodium salt of maleic acid hydrolysis of poly, low molecular weight polyelectrolyte, generally relative molecular weight of400 to 800,non-toxic, soluble in water, high chemical stability and thermal stability, decomposition temperature330℃.In the high-temperature (<350 ℃) and highPHwere greatly limited effect dissolution.DT-102suitable for alkaline water or mixtures with other drugs to use.DT-102at300℃, the following is still good scale inhibition against carbonate dispersion, scale of time up to 100h.As theDT-102scale performance and high temperature performance, so the flash device in the desalination of sea water and low pressure boiler, steam locomotive, crude oil dehydration, water pipelines and industrial circulating cooling water are widely used.AlsoDT-102in the plastic recycling as a cleaning agent to use a special washing effects, showing excellent cleaning ability.DT-102can also be used for cement additives. 2,Specification items index Appearance Light yellow to brown red transparent liquid Solid content% ≥ 40.0 Bromine value mg / g ≤ 80.0 Average molecular weight ≥ 450 pH (1% solution) 6.0---8.0 Density (20 ℃) g / cm3 ≥ 1.18 3,Using method DT-102usuallyas 1 ~ 15ppm compounds with organic phosphate, used in circulating cooling water, oilfield water injection, crude oil dewatering and low-pressure boiler furnace processing, has good scale inhibition and stripping the old scale, inhibition rate up to98%.DT-102when used as a plastic detergent wash solution of1-2%in accordance to add. 4,Safety Protection DT-102is neutral, avoid contact with eyes and skin ,once contacted,flush with water. 5, Package and Storage Normally in 25kg plastic drum , or determined by the users.Storage for ten months.

氨基三甲叉膦酸

Copyright(C)2013. Zaozhuang Dongtao Chemical Technology Co.,Ltd. All Rights Reserved. Supported by Zaozhuang Dongtao Chemical Technology Co.,Ltd.